How To Clean Weathertech Floor Mats?

Last Updated on October 6, 2023 by Matthew Lloyd

To clean your WeatherTech floor mats, remove them from your vehicle and shake off any loose debris. Use a garden hose or pressure washer to rinse the mats thoroughly. Then, apply a small amount of Dawn dish soap and scrub the mats with a scrub brush to remove dirt and stains. Rinse off the soap and allow the mats to dry completely. For a refreshed appearance,  use Renegade Rubber, Vinyl, and Plastic Cleaner, spray it directly on the mats, and rub it in. Let the mats dry again before reinstalling them in your vehicle. Alternatively, you can clean the mats with mild detergent and a gentle bristled brush.

Method 1: Cleaning With Dawn Dish Soap And A Garden Hose

Supplies Needed

1. WeatherTech floor mats
2. Garden hose or pressure washer
3. Bucket of water
4. Dawn dish soap
5. Scrub brush or soft-bristle brush
6. Renegade Rubber, Vinyl, and Plastic Cleaner
7. Microfiber cloth or sponge

Step 1: Removing the Mats

• Open your car door and pull out the WeatherTech floor mats for easier access.

Step 2: Initial Cleaning

• Shake out the mats to remove loose dirt and debris.
• Use a garden hose or pressure washer to rinse the mats thoroughly. A pressure washer works especially well for a more thorough cleaning.

Step 3: Scrubbing with Dawn Dish Soap

• Apply a small amount of Dawn dish soap directly onto the mats.
• Use a scrub brush to gently scrub the mats, paying extra attention to areas with stubborn stains or discoloration.

Step 4: Rinsing Off the Soap

• Rinse the mats thoroughly with water to remove all the soap residue.
• Shake off the excess water from the mats.

Step 5: Restoring the Mats with Renegade Rubber, Vinyl, and Plastic Dressing

• Purchase Renegade Rubber, Vinyl, and Plastic Dressing, available on Amazon.
• Shake the bottle of Renegade Dressing and apply a few sprays directly onto the mats. Alternatively, spray it onto a microfiber cloth and then rub it onto the mats.
• Thoroughly rub the dressing into the mats, ensuring even coverage.

Step 6: Let the Mats Dry

• Allow the mats to air dry completely. It may take some time to dry out entirely, depending on the weather conditions.

Method 2: Cleaning with Mild Detergent and Gentle Bristled Brush

Gather Your Supplies

To clean your WeatherTech floor mats, you’ll need a few readily available items:

• Mild Detergent
• Warm water
• Bristled brush (preferably one with medium to stiff bristles)
• Water hose or bucket for rinsing
• Towels or a drying rack for air drying

Prepare the Mats for Cleaning

1. Remove the floor mats from your vehicle.
2. Shake off any loose dirt or debris from the mats.
3. If the mats are excessively dirty, gently rinse them with water before proceeding.

Apply Dish Soap and Scrub

1. Dampen the floor mat with warm water.
2. Apply a small amount of mild dish soap directly onto the mat.
3. Use a bristled brush to scrub the mat thoroughly, focusing on stained or dirty areas.
4. Pay attention to the corners and crevices of the mat, using a brush with stiff bristles for more effective cleaning.
5. Allow the dish soap to sit on the mat for 30 seconds to help break down stains.

Rinse and Dry the Mats

1. Rinse the floor mats thoroughly with a water hose or pour clean water from a bucket.
2. Remove all traces of soap from the mats, paying extra attention to the crevices.
3. Shake off excess water or use a towel to remove moisture.
4. Allow the mats to air dry completely before returning them to your vehicle. You can hang them on a drying rack or flat them on a clean surface.

Frequently Asked Questions (FAQs)

Conclusion

Cleaning your WeatherTech floor mats is a simple task that can greatly improve the appearance of your vehicle’s interior. Whether you use a pressure washer or household cleaning products, following the step-by-step guide outlined in this article will help you achieve excellent results. Remember to remove the mats, shake off loose debris, apply soap, scrub with a brush, rinse, and allow them to air dry.

Key Points:

• Remove the mats from the vehicle before cleaning.
• Shake off loose debris before starting the cleaning process.
• Rinse the mats with water to remove surface dirt.
• Apply a small amount of mild dish soap or detergent to the mats.
• Scrub the mats with a brush to remove stubborn dirt and stains.
• Rinse off the soap or detergent thoroughly.
• Allow the mats to air dry completely before returning them to the vehicle.
• Optionally, apply a rubber, vinyl, and plastic dressing for protection and a like-new finish.
• Avoid using harsh chemicals, bleach, or silicon-based products on the mats.
• Regularly clean the mats to maintain their appearance and longevity.

Keeping your WeatherTech floor mats clean enhances your vehicle’s lifespan.