How To Clean Car Speakers?

Last Updated on October 6, 2023 by Matthew Lloyd

Clean car speakers are an important part of keeping your vehicle’s audio system in top condition. Keeping them clean is key to ensuring they continue to provide high-quality sound and last a long time. Cleaning car speakers is fairly simple and can be done with basic tools and supplies.

Ways To Clean The Car Speaker

Vacuum: Using a vacuum with an upholstery attachment is one of the most effective ways to clean car speakers. It can be used to remove dust and dirt from the speaker grilles, cones, and cabinets.

Brush: A soft-bristled brush can be used to loosen more stubborn dirt and debris from the speaker grilles and cones.

Air Compressor: An air compressor can be used to blow away dirt, dust, and debris from the speaker grilles, cones, and cabinets.

Clean Car Speakers

You Will Need

• Vacuum Cleaner
• Soft-Bristled Brush
• Air Compressor
• Mild Cleaning Solution (Diluted Dish Soap And Water)
• Protective Covers (Optional)
• Microfiber Cloth
• Air Cans (Optional)
• Rubber Protectant

Instructions

Unscrew The Speaker Grills:

1. Begin by unscrewing the speaker grills or covers to get access to the components inside. This can be done with a screwdriver or other suitable tool. Be sure to keep track of any screws you remove so they can be reattached later.
2. Once the speaker grills are removed, inspect the components inside the speaker cabinet. Look for any signs of damage or wear and tear that could cause audio problems.

Clean The Car Speaker Components:

1. Once you have inspected the components, use a vacuum cleaner with an upholstery attachment to remove dust and dirt from the grille, cone, and cabinet surfaces. You may also use a brush or air compressor to remove more stubborn dirt and debris.
2. Make sure to clean the tweeter with a damp microfiber cloth dipped in the mild cleaning solution. Dry it with another dry microfiber cloth afterward.
3. If using an air can spray the air can into all crevices and corners of the speaker cabinet. This will help to remove any remaining dirt or debris that may have been missed during cleaning.
4. Finally, apply a rubber protectant to the speakers to help keep them clean and free from dust buildup in the future. If possible, use a protective cover over your car speaker when not in use.

Tips For Cleaning Your Car’s Speaker

Inspect Regularly: Check your car’s speakers on a regular basis for any signs of damage or wear and tear that could cause audio problems.

Clean Speaker Grilles: For optimal sound quality, clean the speaker grilles regularly with a vacuum or air compressor to remove dirt and dust buildup.

Avoid Water: Do not use water or any other liquids to clean the speakers, as this can damage the components.

Clean The Tweeter: Use a microfiber cloth to remove dust and debris from the tweeters. You should clean it with a damp microfiber cloth dipped in warm water and dry it with another dry microfiber cloth.

Use Protective Covers: If possible, use a protective cover over your car speakers when not in use to reduce the amount of dirt and dust that accumulates on them.

Types Of Speaker

Woofers: These are the largest type of speaker and produce low-frequency bass sounds.

Midrange Speakers: These produce mid-range tones like vocals, guitars, and keyboards.

Tweeters: These are the smallest type of speakers and produce high-pitched treble notes.

Subwoofers: These speakers produce deep, low-frequency tones that are often felt more than heard.

Equalizers: These help to adjust the balance of sound in a car speaker system. They can be used to boost certain frequencies or reduce others for optimal sound performance.

How Can I Protect My Speakers From Damage?

• Carefully inspect the speakers for any signs of damage or wear and tear before cleaning.
• Avoid using water to clean your car speakers, as this can cause damage to the components inside.
• Use only microfiber cloths and mild cleaning solutions when cleaning the surface of the speakers.
• If using an air compressor, make sure to set the air pressure to a moderate level.
• Use protective covers over your car speakers when not in use in order to reduce dust and dirt buildup.
• Apply a rubber protectant after cleaning to help keep the speakers clean and free from dust accumulation in the future.

FAQs

Why Do Speaker Holes Get Dirty?

Speaker holes and grilles can get dirty over time due to dust, dirt, and other debris that accumulates on the surfaces. This buildup can cause audio problems if left unchecked, so it’s important to clean them regularly.

How To Clean The Speaker Cone?

1. First, you need to remove the grille that covers the speaker cone by unscrewing it or popping it off.
2. Use a soft cloth dampened with water and mild soap to wipe down the surface of the speaker cone. Avoid using harsh chemicals or scrubbing too aggressively, as this could damage the delicate material.
3. Once you’ve wiped away any dirt or debris, allow the speaker cone to air dry completely before reattaching the grille.

Can I Use Any Cleaning Agents To Clean My Car Speakers?

No, you should avoid using any harsh chemicals or abrasive cleaning agents when cleaning your car speakers, as this can damage the delicate components inside.

How Do I Remove Rust From Speaker Grills?

1. Make sure to remove the speaker grills from the speakers and lay them out on a flat surface so you can access both sides of each piece.
2. Use a soft brush to scrub away any rust or corrosion that has built up on the grills.
3. Apply a rust remover to the grills and allow it to sit for a few minutes before scrubbing it away with the brush.
4. Use a damp cloth or rag to wipe away any remaining rust or residue, then dry with a clean microfiber cloth.

How Do I Clean The Rubber Surround?

1. Start by preparing a mild cleaning solution with warm water and car soap.
2. Use a soft brush or microfiber cloth to scrub away any dirt and debris from the rubber surround.
3. Wipe with a damp cloth to remove any remaining dirt or debris, and then use a dry microfiber cloth to dry the rubber surround. Allow it to dry completely before reattaching it to the speaker cabinet.
4. Finally, apply a rubber protectant to help keep the surroundings clean and free from dust buildup in the future.

Conclusion

When cleaning car speakers, it is important to understand the material of your speakers before proceeding with any cleaning. Depending on the material, different cleaning methods may be required. Additionally, it is important to take extra precautions when using solvents in order to avoid damaging your speakers. Following these guidelines will ensure your car speakers are properly and safely cleaned for optimal performance.